Make your miniature bases and DnD tiles in easy way!This set contains STL files that allow you to print a Tile Maker and 5 different
Texture Rollers in two versions: solid and with a 3/4" hole.
It is recommended to print Texture Rollers using the lowest possible layer height, such as 50-100 microns - especially for such a detailed texture as the Bark.
Supports are not needed.
This product has been tested on Ender-3. PLA, 205C, 0.12mm and 0.08mm layer height, 15% infill. No supports.
Note: It's not a physical product. The package contains digital STL files. You will need to print them yourself using a 3d printer.
These files are licensed for personal use. You do not have permission to sell the prints or distribute the files.
Interested in a commercial license? Check here: https://3dhexes.com/commercial-license/
Put the appropriate putty/clay on the chosen surface. Smooth the surface using, for example, a roller or other cylindrical object (even spray can).
Move the Roller over the putty/clay applying equal pressure at all parts.
You can use a lot of different materials. Some require proper preparation, check the manufacturer's recommendations. The easiest to use material is polymer clay.
Popular materials for use with these Rollers are also Green Stuff and Milliput.
Remember to keep your Roller clean.
This set also contains the STL Tile Maker file. Thanks to this item, you can easily create 1" tiles without destroying the texture. Use it before the putty/clay is dry.
Useful videos on how to use this type of Rollers: