Edit product

€30

CVerse

Package of 17 devices (MIDI, instruments and effects) to shape control voltages from Ableton Live 10 and send them via your DC coupled digital to analog converters (Expert Sleepers, MOTU, Universal Audio, Presonus, Lynx...).

Parameters are automatically mapped to Ableton Push and "Push-like" encoder/display controllers.


User guide here :
https://drive.google.com/open?id=14_r0ZkKSL8G_9TXRjnf9MSYIVfFqQzcs


- Audio out (audio effect device)

Routes the signal to up to 24 simultaneous outputs (auto-detect available outputs), mute, level (bi-polar) and naming for each of the output. Each instance of this device is sharing with the others its configuration. Output meter in voltages (+-5v or +-10v). Save and recall user default parameters.


- Audio in (audio effect device)

Route an external audio source to the chain, embedded oscilloscope to monitor the incoming signal.


- MIDI poly (midi effect device)

Split polyphonic MIDI sequences to 2 to 5 monophonic ones and route them to the MIDI mono devices in voice mode. Detect and displays the last recognised chord name.


- MIDI mono

Convert MIDI polyphonic sequences to monophonic ones (monophonic mode) Receives one voice of a polyphonic sequence sent from the MIDI poly device.


- Calibrate

Create a calibration curve preset tailored for each of your oscillators. Save them for later use with the Pitch and Quantize devices.


- Pitch

Convert MIDI note and pitch bend messages to pitch CV signal. The conversion is made using the calibration presets files created with the Calibrate device.


 - Quantize

Receives signal from the chain or a MIDI automation and convert it into pitch signal allowed by the chosen scale. The conversion is made using the calibration presets files created with the Calibrate device. Control over the overall output octave range.


- Gate

Convert MIDI note-on/off to gate or trig signal. Level can be modulated by the velocity. In Trig mode control over the pulse width of the signal. MIDI note fIlter allowing only 1 or all except 1 note to be converted. Embedded oscilloscope to monitor the signal.


- Envelope

Generates AD or ADSR envelope when triggered by MIDI note-on messages. Control over length and shape for the A D R stages and over level for the sustain. Velocity can modulates the general level. Pitch can modulate the lenght of the stages (for a more natural behaviour). Re-trigger mode. Loop mode. Output level section*. Embedded oscilloscope to monitor the signal. 


- Expression

Convert the selected MIDI modulation sources to a signal. Output level section*. Embedded oscilloscope to monitor the signal.


- Function

Generates functions. In the sync loop mode the function will loop on itself, the size of the loop will depend on its length. In the note trig mode MIDI note-on messages received from the inlet of the device will trigger the function. Loop & note mode combines both of the triggering methods. MIDI note fIlter allowing only 1 or all except 1 note to trigger the function (note trig and combined modes only). General level can be modulated by the incoming velocity value. Output level section*. Embedded oscilloscope to monitor the signal. 


- LFO

Generate a low frequency oscillating signal. Seven shapes. Bitrate reducer. Rate in bars or in hertz. Offset. Output level section*. Embedded oscilloscope to monitor the signal.


- Step

CV Step sequencer with 2 transport modes: Sync (locked to Live's transport bar) and Note in (next step is triggered by MIDI note-on messages received by the chain of the device). MIDI note fIlter allowing only 1 or all except 1 note to trigger the next step (Note in mode only). Control of the rate in bar division (sync mode only). Swing level. Playing direction. Up to 32 steps loop. Resolution from 2 to 120 discrete values (Y axe). Randomisation of the looped steps. Auto-randomisation. Output level section*. Embedded oscilloscope to monitor the signal. 


- Loop

Record and loop a MIDI control change (CC) sequence up to 32 steps length. Mode selector to switch between playing and recording. Variable playing speed of the sequence. Playing direction of the sequence. Offset parameter to fine set the looping point. Output level section*.


- Map

Convert MIDI values to a signal. Great for mapping an envelope follower, a modulation source, or a MIDI automation. Output level section*. Embedded oscilloscope to monitor the signal. 


- Clock

Generates 2 signals. One clock signal from 1 pulse per bar up to 24 pulses per quarter note (PPQN). One start/stop (gate) or reset (trig) signal with pulse width and level controls. Embedded oscilloscope to monitor the signal.


- Oscilloscope

Monitor incoming signal. Control over zoom and speed. Stabilisation. Level monitor in hertz, MIDI note, note number or voltage (+-5v or +-10v).


*Output level section: mute, invert, smooth, jitter, level (bi-polar), follow Live's transport bar status ( F ), oscilloscope visibility ( ∿ ).


Compatibility: Ableton Live from version 10.


You've purchased this product

See it in your library

View in Library
Sorry, this item is not available in your location.
Sold out, please go back and pick another option.
  • Size814 KB

Checkout

CVerse

Enter your info to complete your purchase

Card

···· ···· ···· 4242
Test card

05/18

Card

Use a different card?

Card

pp paypal

or pay with

We do not keep any of your sensitive credit card information on file with us unless you ask us to after this purchase is complete.

or pay with

Please confirm your location:
You'll be charged US$35.31.

Your purchase was successful!

We charged your card and sent you a receipt

    Gumroad Library

    Download from the App Store or text yourself a link to the app

    Good news! Since you already have a Gumroad account, it's also been added to your library.

    Powered by Gumroad