Age Of Mecha™ M.U.L.E. action figure
Introducing the M.U.L.E. (Mobile Utility and Logistics Engine)
please read the description below!
attention: legs have been updated to a newer version with better fit and stability!
If you already own the files, you can just download the updated legs separately.
For new customers: the legs have been updated in all file packages.
The M.U.L.E. is used in hazardous, hard to traverse locations, providing support and logistics for disaster relief forces, emergency personnel and action forces.
It features a carriage with attachment points for weapons and other equipment and comes with a set of assets, including:
-utility crate
-laptop
-first-aid case
The radar dish and carriage are removable. Future conversion packs can be mounted instead.
Stay tuned for updates.
The M.U.L.E. is the perfect companion for the FREE Hazmat Response Unit available here:
https://gum.co/fdzHL
1/35 scale printable parts, snap fit assembly, no glue required!
If you do not own or have immediate access to a printer, here's a list of online 3D printing services you can use:
https://all3dp.com/1/best-online-3d-printing-service-3d-print-services/
We highly recommend to choose SLA or DLP printers!
FDM prints usually do not show the intricate detail.
If you want to use online print services like Shapeways, please use the small STL files to allow for their file size limit.
The Form files are readymade: ideal part orientation + support structures are already in place.
Made to print with GreyV4 resin, 0.05mm layer height.
If you are printing on a Form2/Form3, I recommend the following procedure:
Use the standard grey resins.
After the Isopropanol wash, leave the parts out to dry for at least 6-12 hours (normal room temperature, no direct sunlight!), that way the surface is hard enough as to not rub off during assembly, yet the parts still have enough flexibility.
The joint fits are quite tight in the beginning, so make sure to wiggle the parts together slowly and carefully to avoid breaking parts. Optionally, you can airbrush or paint the parts before assembly for easier masking.
The Grey resin tends to shrink over time (the process goes on several weeks after print) until it has fully settled it's properties.
If the joints come loose, use small portions of modelling clay, like super sculpey to fill in the gaps.
Have fun with them :)
License: Attribution-NonCommercial 4.0
1x M.U.L.E. self printable action figure + set of assets (assembly required) in .FORM and .STL file formats