Edit product

€28

Environemntal: BUILDING PERFORMANCE SIMULATIONS part 2 with Daniel Nielsen

An indoor simulations session

-------------------

_STEP 0  GETTING STARTED

0.1 Webinar introduction

0.2 Short repetition to Honeybee for Grasshopper (+Rhino)

0.3 Short repetition to Environmental Design Analysis - process and methodology

_STEP 1  CREATING ZONE MODELS IN HONEYBEE

1.0 Short repetition to model types

1.1 Create simple Parametric Grasshopper models

_STEP 2  ANALYSIS OF CONCEPTUAL ROOMS AND FACADE DESIGN - ENERGY AND COMFORT

2b.0 Short repetition to Analysis of conceptual Rooms and Facade design

2b.1 Introduction to Thermal Comfort and Energy simulations

2b.2 Setting-up Comfort / Energy models (zone properties etc.)

2b.3 Visualizing simulation results (zones and surface)

2b.4 Zone and Surface Gains and losses

2b.5 Total Energy simulation

2b.6 Comport Analysis

2b.7 Selecting, Creating and Applying thermal properties to surfaces or zones

_STEP 3  ANALYSIS OF NEW CONTEXTUAL BUILDING CONCEPTS

3.0 Introduction to Analysis of new contextual Building Concepts

3.1 Importing energy models generated from other tools

3.2 Simulation of Visual Comfort of selected contextual rooms

3.3 Simulation of Thermal Comfort of selected contextual rooms

3.4 Simulation of Energy use of selected contextual rooms

_STEP 4  PARAMETRIC SIMULATIONS OF CONCEPTUAL ROOMS AND FACADE

4.0 Introduction to Parametric simulations

4.1 Short note about parametric studies with Galapagos and Octopus 

-------------------

DANIEL NIELSEN

The Danish architect Daniel Nielsen has a broad experience with Architectural Sustainability and the integration of parametric 3D modeling and simulation tools into the process. He have worked on projects at various scales - from buildings to planning, and have been involved in research and education programs at The Royal Danish Academy of Fine Arts and Technical University of Denmark.

-------------------

INSTALLATION INSTRUCTIONS FOR 2019

-------------------

LADYBUG

If you have an old version of LB+HB, download the file here (http://hydrashare.github.io/hydra/viewer?owner=mostaphaRoudsari&fork=hydra_1&id=Remove_Ladybug_and_Honeybee) and open it in Grasshopper to remove your old Ladybug and Honeybee version otherwise download the latest version of Ladybug + Honeybee from Food4Rhino (http://www.food4rhino.com/app/ladybug-tools) and follow steps below.

Make sure that you have a working copy of both Rhino and Grasshopper installed.

Open Rhino and type "Grasshopper" into the command line (without quotations). Wait for grasshopper to load.

[ONLY FOR RHINO 5] Install GHPython 0.6.0.3 by downloading the file here (http://www.food4rhino.com/app/ghpython) and drag the .gha file onto the Grasshopper canvas.

Select and drag all of the userObject files (downloaded from Food4Rhino) onto your Grasshopper canvas. You should see Ladybug and Honeybee appear as tabs on the grasshopper tool bar.

Restart Rhino and Grasshopper. You now have a fully-functioning Ladybug. For Honeybee, continue to the following:

HONEYBEE

Install Radiance to C:\Radiance by downloading it from this link (https://github.com/NREL/Radiance/releases/tag/5.1.0) and running the exe. NOTE: The default installation path for Radiance is set to C:\Program Files(x86)\Radiance which should be modified to C:\Radiance.

Install Daysim 4.0 for Windows to C:\DAYSIM by downloading it at this link (http://daysim.ning.com/page/download) and running the exe.

Install the Latest OpenStudio by downloading and running the .exe file from this link (https://github.com/NREL/OpenStudio/releases/tag/v2.5.0).

Install Berkeley Therm 7.6 by downloading and running the .exe file from this link (https://windows.lbl.gov/tools/therm/software-download). Note that Honeybee does not work with the newest, 7.7 version (!), so download 7.6 instead (toward the bottom of the page).

Finally, copy falsecolor2.exe (https://github.com/mostaphaRoudsari/honeybee/blob/master/resources/falsecolor2.exe?raw=true) to C:\Radiance\bin

-------------------

ORIGINAL INSTALLATION INSTRUCTIONS

-------------------

BEFORE THE WEBINAR

Instructions for Installing Ladybug + Honeybee and other needed software

(Follow steps 0-4 for basic functionality and 0-10 for full functionality)

0 If you have an old version of LB+HB, download this file and open it in Grasshopper to remove your old Ladybug and Honeybee version. https://app.box.com/s/ds96em9l6stxpcw8kgtf

1 Make sure you have a copy of both Rhino and Grasshopper installed that is working and up to date

2 Open Rhino and type "Grasshopper" into the command line (without quotations) and wait for grasshopper to load.

3 Install GHPython 0.6.0.3 by downloading the file from this link and drag the .gha file onto the Grasshopper canvas. http://www.food4rhino.com/project/ghpython?ufh

4 Download Ladybug and Honeybee from food4rhino. You need to have an account to download, create one or use the one you have and login. http://www.food4rhino.com/project/ladybug-honeybee

5 Select all and drag and drop all of the userObject files onto your Grasshopper canvas. You should see Ladybug and Honeybee appear as tabs in the grasshopper tool bar.

6 Restart Rhino and Grasshopper. You now have a fully-functioning Ladybug. Install Honeybee, follow the below steps

7 Install Radiance to C:\Radiance by download it from this link and run the exe file.

https://github.com/NREL/Radiance/releases/download/4.2.2/radiance-4.2.2-win32.exe

8 Install Daysim 4.0 for Windows to C:\DAYSIM by downloading it at this link and run the exe file. http://daysim.ning.com/page/download

9 Install EnergyPlus 8.1 to C:\EnergyPlusV8-1-0 by going to the DOE website. It is needed to have an account, create one or login and select 8.1.0.009 either 32 or 64 bit. After download run the exe file. http://apps1.eere.energy.gov/buildings/energyplus/energyPlus_download.cfm?previous

10 Download and Copy (no installation is needed only copy-paste the files) falsecolor2.exe and evalglare.exe to C:\Radiance\bin

http://pyrat.googlecode.com/files/falsecolor2.exe

http://www.ise.fraunhofer.de/en/downloads-englisch/software/evalglare_windows.zip/at_download/file

You now have a fully-working version of ladybug and honeybee

FURTHER DOWNLOADS / INSTALLATIONS

11 Download this plugin for image visualization, and place the .gha file in the below folder path, the username is probably your login name.

http://www.grasshopper3d.com/forum/attachment/download?id=2985220%3AUploadedFile%3A1101388

C:\Users\****YOUR_USERNAME****\AppData\Roaming\Grasshopper\Libraries

You've purchased this product

See it in your library

View in Library
Sorry, this item is not available in your location.
Sold out, please go back and pick another option.
  • You'll get
  • video3+hrs
  • general sheet.pdf
  • exercise files.gh, .3dm
Available to stream instantly
Watch link provided after purchase

Checkout

Environemntal: BUILDING PERFORMANCE SIMULATIONS part 2 with Daniel Nielsen

Enter your info to complete your purchase

Card

···· ···· ···· 4242
Test card

05/18

Card

Use a different card?

Card

pp paypal

or pay with

We do not keep any of your sensitive credit card information on file with us unless you ask us to after this purchase is complete.

or pay with

You'll be charged US$28.

Your purchase was successful!

We charged your card and sent you a receipt

    Gumroad Library

    Download from the App Store or text yourself a link to the app

    Good news! Since you already have a Gumroad account, it's also been added to your library.

    Powered by Gumroad