Edit product

$34.95

TUTORIAL VIDEO-Install Tall (Ape) 16" Handlebars on Harley Davidson Road King & Other Models With No Fairing-Extend Wires, Lines, Cables

A Video by Biker for Bikers

Fact: Dealerships and mechanics can charge over $1,000 to put aftermarket handlebars on your Harley Davidson motorcycle. It is often times well over that amount, yet we know you can do this project yourself by watching this tutorial video. We teach you everything you will need to know and walk you through the entire process.

In this tutorial video we install 16" ape hanger handlebars & new hand grips on a Harley Davidson Road King motorcycle. We wired the new bars internally for that clean look. This #1 rated tutorial video will not only work for the Harley Davidson Road King, but for an array of different, yet similar Harley models.

Check out our Harley Davidson Handlebar Install Video Pager Here and pick the video that is right for your project.

You will not find a more thorough aftermarket handlebar install tutorial video out there. It is a video by bikers for bikers. You can put new handlebars on your Harley right in your garage or on your patio right on the kickstand! There are no specialty tools or motorcycle lifts required and I will give you a list of items you will need and things to think about later in this article.

***Purchase it now and stream it immediately just like a YouTube video as many times as you like! FYI: Here is just one an example of one of our many completely Free tutorial videos, so you can bet our for purchase videos are that and more. Click here to see that detail in that video. And while you are there subscribe to our YouTube channel. 

The video is high definition and it is if you can reach out and turn the wrenches with us. In this video we skip no steps and we have no doubt that after watching you can do this project with ease. Tons of bikers all over the world now have aftermarket handlebars on their Harley's because of this exact video. We are very detailed in our explanations and we want you to be successful. That is where we get our greatest satisfaction.

There are many aftermarket handlebars for your Harley Davidson motorcycle in every shape, color, and size imaginable and the cost can vary just as much. There are many companies making quick connect/install kits. Most of these simple kits are the same and come with a bundle of colored wires for extending wire harnesses, quick connectors, and shrink tube. If you are going with taller style handlebars then the kit may also include an extended clutch cable and extended front brake lines.

Note: If you wan't to put heated grips on your Harley Davidson then now is the time, because you will be right there with everything apart. We can help you complete that too with our Harley Davidson Heated Grips Install Video.

These handlebar wiring kits have quick connect pins for extending the stock wire harnesses. You usually take off the stock plastic harley wire plugs, extend the wires with the quick kit colored wires, and then plug back into the stock plugs all without soldering. You can always snip the quick connectors that come with the wire kits and solder if you are more comfortable with that.

There are also kits with the OEM plugs on the end of the wire extensions to quickly hook up after soldering extensions in. Either way, we have you covered in this video. We show you how to proceed depending on your particular kit, which aren't much different.

We can tell you from experience that you will want to have a soldering iron and solder on hand. Often times because of bulky plugs it may be necessary to solder a bit to make things clean and easy. Some kits require soldering. Don't worry, we make soldering so easy and show you exactly how to do it properly in this video.

Most the time you can go as tall as 12" aftermarket handlebars without having to replace wires, cables, and lines. I said, "most the time", so you need to do your own research for your particular year and model before you begin your project.

Tools & items needed: (affiliate links)

Screwdrivers (standard & phillips)

Torx head wrenches (standard sizes)

Standard box end wrenches (American & Metric)

Wire strippers (a pocked knife could be used instead)

Pliers (standard & needle nose)

Butane mini torch or just a standard lighter

Allen/Hex head wrenches (American)

Transmission oil (one quart)(replacement if you have to put extended clutch cable or hydraulic clutch lines on)

DOT 4 brake fluid (if replacing with extended brake lines)(for bleeding lines)

Transmission cover gasket (If you have to put extended clutch cable or hydraulic lines on)

A simple hand operated brake line bleeder vacuum pump

Basic 40W soldering iron kit

Solder

Consider using one of our below affiliates to purchase your aftermarket handlebars and extension kits.

Revzilla | Amazon | Cruiser Customizing | Cycle Parts

As you can see, you don't need that much and can do this project right on the kickstand. So what are you waiting for? Don't waste your money taking your Harley to a mechanic and spend over $1,000 for this project. Get the tutorial video now and get started! Have the satisfaction of working on your Harley and completing your own projects.

Keep the rubber side down and the shiny side up!

Thanks,
Ryan Urlacher
Chief Executive Officer
Law Abiding Biker
Podcast & Media

You've purchased this product

See it in your library

View in Library
Sorry, this item is not available in your location.
Sold out, please go back and pick another option.

0 ratings

  • STREAM & WATCH IMMEDIATELY AS MANY TIMES AS YOU LIKE AFTER PURCHASE ON YOUR COMPUTER OR MOBILE DEVICE JUST LIKE A YOUTUBE VIDEO.
Available to stream instantly
Watch link provided after purchase

Checkout

TUTORIAL VIDEO-Install Tall (Ape) 16" Handlebars on Harley Davidson Road King & Other Models With No Fairing-Extend Wires, Lines, Cables

Enter your info to complete your purchase

Card

···· ···· ···· 4242
Test card

05/18

Card

Use a different card?

Card

pp paypal

or pay with

We do not keep any of your sensitive credit card information on file with us unless you ask us to after this purchase is complete.

or pay with

You'll be charged US$34.95.

Your purchase was successful!

We charged your card and sent you a receipt

    Gumroad Library

    Download from the App Store or text yourself a link to the app

    I want to thank you for your purchase and support of Law Abiding Biker® Podcast & Media.

    Don't forget to check out the vey popular Law Abiding Biker Podcast!

    **Please join the FREE Email Club, so you can get all the latest free content, for sale content, and coupon codes. No spam guarantee and only relevant content. JOIN THE COMMUNITY NOW!

    www.LawAbidingBiker.com/EmailClub

    Here are some other videos you may be interested in: http://www.lawabidingbiker.com/buyvideos

    Word of mouth and passing along LAB Media's information via social media or any other format would be much appreciated! We truly respect and want to build a trusting relationship with our customers, audience, supporters, and followers. We want to be your number one go to source for all your Law Abiding Biker needs.

    Again, thank you for your support and God Bless! Join the Law Abiding Biker Community today!!

    Best Regards,

    Ryan Urlacher

    CEO

    Law Abiding Biker

    LAB Media

    www.lawabidingbiker.com

    ryan@lawabidingbiker.com

    Good news! Since you already have a Gumroad account, it's also been added to your library.

    Powered by Gumroad